Holds doors open 3 ways
The Wedge-It is designed to hold an interior or exterior door open to a 90 degree angle. It can be placed in any of 3 locations on a door.
Over the hinge
With door open to a 90 degree angle place the Wedge-It over hinge between the door and the door jamb.
Bottom of the door
The Wedge-It can be used rubber pad side down on the floor like a traditional wooden or rubber door stop.
Top of door
With door open to a 90 degree angle place the Wedge-It on top of the door between door and door jamb.
CAUTION
DO NOT attempt to close the door with the Wedge-It placed on top of door or over the hinge, this could cause damage to the door or Wedge-It. The Wedge-It is designed to break when placed under enough force in order to save the integrity of the hinge and door.
Additional Applications
Holding a door open at any angle
1. A single Wedge-It can be placed at the end of the door to keep the door open at any angle. The success of this placement is dependent on the door
2. Two Wedge-Its can be placed on either side of the door to keep it open at varying angles.
Bottom of doors with a larger gap
If the gap at the bottom of the door is greater than 2 inches, placement of the Wedge-It in a vertical position may hold the door open.
The success of this placement is dependent on the door
Top of the door applications
With door open to a 90 degree angle place the Wedge-It on top of the door between door and door jamb.
The Wedge-It is designed with 4 different settings to fit between the top of the door and the door jamb (see below). This is because that distance varies between doors.